Brocade 6510 Hardware Reference Manual - Manual (Page 13)

• A USB port that provides storage for firmware updates, output of the supportSave command and
storage for configuration uploads and downloads.
• Two hot-swappable, redundant power supply and fan FRUs. There are two fans per FRU.
• Rack-mount design (1U form factor) in a 19-inch EIA rack.
• One LED (green/amber) per FC port to indicate status.
• One LED (green) for system power.
• One LED (green/amber) for system status.
• Two Ethernet LEDs (integrated with RJ45) for speed and activity status.
• SEEPROM for switch identification.
• Voltage monitoring.
• Fan monitoring including flow direction.
• Temperature monitoring.
• Real-time clock (RTC) with battery.
• The Brocade EZSwitchSetup wizard that makes SAN configuration a three-step point-and-click task.
Port side of the Brocade 6510
The port side of the Brocade 6510 includes the system status LED, console port, Ethernet port and
LEDs, USB port, and Fibre Channel ports and the corresponding port status LEDs.
FIGURE 1 Port side view of the Brocade 6510
1. System status LED
2. Management Ethernet port with LEDs
3. USB port
4. FC ports 0-3(all LEDs above)
5. FC ports 40-43
6. FC ports 44-47
7. FC ports 4-7
8. Switch ID pull-out tab
9. Serial console port
10.System power LED
NOTE
The two LEDs on the serial console port are non-functional.
The following illustration helps you to identify the port groups and PIDs.
Port side of the Brocade 6510
Brocade 6510 Hardware Reference Manual 13
53-1002174-08