Brocade 6510 Hardware Reference Manual - Manual (Page 28)

• One bicolor (green/amber) port status LED for each port on the switch. These LEDs are arrayed
above each pair of Fibre Channel ports.
• One power supply/fan assembly LED above the AC power switch on each power supply on the non-
port side of the switch
LED locations
The following figure shows the port side of the Brocade 6510. The port status LEDs for the FC ports
are arranged left and right to correspond to the upper and lower ports in each pair. Refer to
Port side
of the Brocade 6510 on page 13 for the locations of the FC ports.
1 System power LED
2 System status LED
3 Ethernet port activity LED
4 Ethernet port speed LED
5 FC port status LED (port 0)
6 FC port status LED (port 4)
7 FC port 4
8 FC port 0
FIGURE 4 LEDs on Port Side of Brocade 6510
NOTE
The two LEDs on the serial console port are non-functional.
The following figure shows the LEDs on the non-port side of the switch.
LED locations
28 Brocade 6510 Hardware Reference Manual
53-1002174-08