Brocade 6505 Hardware Reference Manual - Manual (Page 31)

NOTE
The two LEDs on the serial console port are non-functional.
FIGURE 7 LEDs on the non-port side of Brocade 6505
1. Power supply and fan assembly #1 status LED
LED patterns
The following table describes the port side LEDs and their behavior.
Port side LED patterns during normal operation TABLE 1
LED name LED color Status of hardware Recommended action
Power Status
(green)
No light System is off or there is an internal
power supply failure. Verify the system is powered on
(power supply switches to I), the
power cables are attached, and
your power source is live.
Otherwise, contact your switch
service provider.
Steady green System is on and power supplies
are functioning properly. No action required.
System Status
(bicolor)
No light System is off or there is no power. Verify the system is on and has
completed booting.
Steady green System is on and functioning
properly. No action required.
Steady amber
(for more than
five seconds) A system fault has occurred.
This LED displays steady amber
during POST; this is normal and
does not indicate a fault.
Check the failure indicated on the
system console.
Contact your switch service
provider.
LED patterns
Brocade 6505 Hardware Reference Manual 31
53-1002449-04