Brocade 6505 Hardware Reference Manual User Manual

Page 32

Advertising
background image

Port side LED patterns during normal operation (Continued)

TABLE 1

LED name

LED color

Status of hardware

Recommended action

Blinking amber

Attention is required. A number of
factors can cause this status,
including;

• failure of a single power supply

when two power supplies are
installed

• fan failure
• left FRU bay (#1) empty (when

looking at the port side of the
switch)

• one or more environmental

ranges has been exceeded.

Check the management interface
and the error log for details on
the cause of status.

Contact your switch service
provider.

Ethernet Speed (green) No light

Port speed is 10 Mbps.

No action required.

Steady green

Port speed is 100 Mbps.

No action required.

Ethernet Activity/Link
(amber)

No light

There is no link.

Verify that the Ethernet cable is
connected correctly.

Steady amber

There is a link.

No action required.

Blinking amber

There is link activity (traffic).

No action required.

Optical media port
status(one bicolor LED
for each FC port)

Off

No light or signal carrier on the
media interface.

Verify that the transceiver is
installed correctly and that the
cable is connected correctly.

Steady amber

Receiving light or carrier, but not
online.

No action required.

Slow blinking
amber (2 sec)

Disabled (by diagnostics or by
portDisable command).

Verify that the diagnostic tests
are not being run. Re-enable the
port using the portEnable
command.

Fast blinking
amber (1/2 sec)

Port failure.

Check the management interface
and the error log for details on
the cause of the failure. Contact
Technical Support if necessary.

Steady green

Online.

No action required.

Slow blinking
green (2 sec)

Online but segmented (loopback
cable or incompatible switch).

No action required.

Fast blinking
green (1/2 sec)

Internal loopback (diagnostic).

No action required.

Flickering green

Online, frames flowing through
port.

No action required.

The following table describes the LEDs on the nonport side of the switch.

Brocade 6505 Operation

32

Brocade 6505 Hardware Reference Manual

53-1002449-04

Advertising