Rice Lake Condec UMC600 - Manual (Page 4)

Introduction 1
About This Manual
This manual is intended for use by service technicians
responsible for installing and servicing the UMC600
digital weight indicator. This manual provides
information on installation, calibration, configuration,
and operation of the UMC600. Authorized distributors and their
employees can view or download this
manual from the Condec distributor
site at
www.4condec.com .
1.0 Introduction
The UMC600 is a single-channel digital weight indicator designed to operate in a wide variety of scale and
weighing applications. The indicator is housed in a NEMA 4X stainless steel sealed case. The standard unit is
equipped with a tilt stand base for tabletop or wall mounting applications. The indicator front panel consists of a
21-button keypad, six seven-segment display digits and six LED annunciators (see Figure 1-1 on page 2).
Standard features of the UMC600 include:
• Full front panel digital configuration and calibration.
• Zero and span temperature compensation to ensure compliance with NTEP and Canadian temperature range
requirements (–10 to 40°C).
• Nonvolatile memory stores data for calibration, temperature compensation, configuration parameters, auto or fixed
tare values, PAZ and AZM values, and setpoint values.
• Ten-thousand displayed graduations; 80,000 graduation expansion available.
Note: Use of more than 20,000 graduations may cause undesirable display instability in some applications.
• Analog sensitivity to 0.3 µ V/grad at 20,000 graduations.
• Ten updates per second, with selectable digital averaging and auto averaging; 5 Hz active analog filter for smooth
response.
• Excitation for eight 350 Ω load cells at 10 VDC.
• Operable from AC, internal rechargeable battery with AC charger, or external DC input.
• Time and date print selection.