Rice Lake Condec UMC600 - Manual (Page 70)

Appendix 67
9.2 Parameter Control Code Chart
Use the following code values for parameter descriptions listed in Table 9-2 when specifying the format string. The
actual character depends on the character mapping used by the output device.
Table 9-2. Parameter Control Code Chart
9.3 Display and Error Messages
Code Description Code Description Code Description
200 Gross weight & LB/KG GR 240 Truck gross lb/kg GR 600 Macro file 1 (7.9)
201 Gross weight & LG/KG 241 Truck gross only 601 Macro file 2 (7.10)
202 Gross weight 242 Truck tare lb/kg TR ↕ ↕ (7.11 – 7.15)
203 Gross weight (no 0 blanking) 243 Truck tare only 607 Macro file 8 (7.16)
244 Truck net lb/kg NT
210 Net weight & LB/KG NT 245 Truck net only 700 Delay per setup
211 Net weight & LN/KN 800 Setpoint 1 & SP1 data
212 Net weight 300 Status character 801 SP1 data only
213 Net weight (no 0 blanking) 400 Time & date per setup 802 Setpoint 2 & SP2 data
401 Time per setup 803 SP2 data only
220 Tare weight & LB/KG TR 402 Date per setup
221 Tare weight & LT/KT 500 Ident no. & ID. NO. 999 End of file
222 Tare weight 501 Ident no. only
223 Tare weight (no 0 blanking) 502 Tag
503 held ID NO. & ID. NO.
230 Total WEIGHT & lb/kg TOTAL 504 Held ID NO. (no label)
231 Total weight & LA/KA 510 TICKET NO. & counter data
232 Total weight only 511 Counter data only
233 Total weight (no 0 blanking)
Display Messages
Display Explanation Corrective Action
Err 1
Err 1a, 1b, 1c Loss of configuration
Loss of option configuration Enter configuration
Enter option mode reconfigure
Err 2 Loss of zero calibration Enter digital calibration mode and recalibrate unit
Err 3 Loss of span calibration
Err 5 Loss of auto tare Acquire tare
Err 6 Loss of auto zero Acquire zero
Err 9 Not in span calibration Program in desired value before entering
Err 10H
Err 10L Input > 3.3mV/V @ full scale
Input < 0.4mV/V @ full scale Recalibrate span so FS ≤ 3.3mV/V
Recalibrate span so FS ≥ 0.4mV/V
Err 10P
Err 10- PTZ (push to zero) > 2.0%
PTZ > weight used for span calibration Perform zero calibration
CAL Indicates successful calibration
OL Gross overload Check load cell wiring
UL Gross underrange
Table 9-3. Display and Error Messages