ADC ETU-751C - Manual (Page 37)

700-701-100-02 System Configuration
UTU-701 and ETU-751 List 1 August 9, 2002 27
L
OGGING
O
N
To log on to the maintenance terminal console screen:
1 Press the several times to display the Logon Password screen ( Figure 12 ).
Figure 12. Logon Password Screen
2 Type the password at the prompt or press if a password has not been customized. The console screen
menu bar displays ( Figure 13 ).
Figure 13. Console Screen Menu Bar
The key is the factory default password. If you establish a different password, you must
type the new password (single word, no spaces, up to eight characters) on a subsequent log on.
If the system does not respond, verify that the Hardware Flow Control of the maintenance
terminal is set to NONE
.
SPACEBAR
ENTER
ENTER