ADC ETU-751C - Manual (Page 47)

700-701-100-02 System Configuration
UTU-701 and ETU-751 List 1 August 9, 2002 37
Configure System Settings
Use the System Settings menu to select and configure system-wide operating parameters. Configure system
settings as follows:
1 Type at the Config drop-down menu to display the Config System Settings menu. Figure 21 shows the
Config System Settings menu for the UTU-701C and ETU-751C.
Figure 21. Config System Settings Menu
2 Do the following for each system option setting to be changed. Table 18 on page 38 describes the fields and
options displayed in the Config System Settings menu. The settings in boldface type are factory default
settings.
• Use the or the key to select the sub-menu item to be changed.
• Use the to toggle to the appropriate option or type in the correct information, then press
to select the option.
When using a UTU or ETU as an LTU, configure the Local Unit Role option first.
S
↑ ↓
SPACEBAR
ENTER