ADC ETU-751C - Manual (Page 39)

700-701-100-02 System Configuration
UTU-701 and ETU-751 List 1 August 9, 2002 29
Table 14 describes the drop-down menus selected from the console screen.
Table 14. Console Screen Menus
Menu Name Function Described in this section
Main Display the Main console screen to:
• View the circuit configuration
• View performance summary information
• View alarm summary information
“Main Console Screen” on
page 46
Monitor Monitor the past 24-hour performance of the LTU interfaces, NTU
interfaces, or HDSL spans. “Monitor Menu” on page 48
History View 24-hour, 7-day, or alarm history displays for any of
the following:
• LTU interface
• HDSL spans
• NTU interface
• Clear all the 24-hour, 7-day or alarm histories
“History Menu” on page 52
Config Perform any of the following system functions:
• View or change global operating parameters for the system
• View or change LTU interface, HDSL span, or NTU interface operating
parameters
• View or change alarm parameters
• Set the time and date
• Set or change the unit password
• Change the circuit ID
• Configure terminal display
• Set all operating parameters to factory defaults
“Config Menu Options” on
page 32
Test Perform any of the following test functions:
• Set the loopback mode and location
• Set the loopback time-out
• Enable or disable loopback operation
• Initiate BER test and monitor BER results
“Testing” on page 60
Inventory Display registration information to track product manufacturing,
configuration, and revision state. “Inventory Screen” on page 58
Quit Log off the system. “Logging Off” on page 45
Help Display a screen of helpful information regarding the product. -