Hardware installation, Install hard drive, Step1: unscrew and open the top cover – LT Security LTD2316SE-SL User Manual
Page 10: Step3: mount the hdd as fig2.2, 2 hardware installation, 1 install hard drive
4
Digital Video Recorder User Manual
2 Hardware Installation
Notice: Check the unit and the accessories after getting the DVR.
Please disconnect the power before being connected to other devices. Don't hot plug in/out.
2.1 Install Hard Drive
Notice: 1. This series support one SATA hard drive. Please use the hard drive the manufacturers recommend specially for
security and safe field. Please refer to “Appendix C Compatible Devices 3”.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording
Capacity”.
Step1: Unscrew and Open the top cover.
Step2: Connect the power and data cables. Place the HDD onto the bottom case as Fig 2.1:
Step3: Mount the HDD as Fig2.2:
Note: For installation convenience, please connect the power and data cables first, and then wind the screws to fix the
HDD.
Fig 2.1 Connect HDD Fig 2.2 Screw HDD