LT Security LTD2316SE-SL - Manual (Page 28)

22
Digital Video Recorder User Manual
Fig 4-13 record configuration-time
4.3.4 Stamp
Stamp
：User can overlap the channel name and time stamp on video.
Step1: enter into system configuration  record
configuration  stamp; refer to Fig 4-14:
Step2: tick off camera name, time stamp; click Set
button, user can use cursor to drag the camera name
and time stamp in random positions, refer to below
Figures:
Step3: user can setup all channels with same
parameters, tick off “all”, then to do relevant setup.
Fig 4-14 record configuration-stamp