LT Security LTD2316SE-SL - Manual (Page 38)

32
Digital Video Recorder User Manual
Step2: HTTP port: the default value is 80. If the value changed, user needs to add the port number when typing IP address in IE
address blank .i.e. set HTTP port to 82, IP address:
http://192.168.0.25, user needs to input that address:
http://192.168.0.25:82 into IE browser.
Server port: communication port.
Step3: Tick off the "Obtain an IP address automatically",
the device will distribute IP address, subnet mask, and
gateway IP and DNS server.
Step4: enable PPPoE, user can directly connect the DVR
to internet via ADSL, then input the user name and
password; click TEST button to test the effectiveness of
the relevant information.
Fig 4-29 network configuration-network
4.6.2 Sub stream
Step1: enter into system configuration network
configuration sub stream; refer to Fig 4-30:
Step2: select fps, resolution and quality.
Step3: user can setup all channels with same
parameters. Please tick off “all” to do relevant setup.
Fig 4-30 network configuration-sub stream