LT Security LTD2316SE-SL - Manual (Page 44)

38
Digital Video Recorder User Manual
4.8 P.T.Z configuration
P.T.Z configuration includes two submenus: serial port and advance.
① Serial port
Step1: enter into system configuration P.T.Z
configuration serial port; refer to Fig 4-36:
Step2: tick off Enable, setup the value of address, baud
rate and protocol according to the settings of the speed
dome.
Step3: user can setup all channels with same
parameters, tick off “all”, then to do relevant setup.
Fig 4-36 P.T.Z configuration-serial port
Definitions and descriptions of network stream:
② Advance
Step1: enter into system configuration
 P.T.Z configurationadvance; refer to Fig 4-37:
Step2: in the Advance interface, click preset “Setting” button, a dialog box will pop-up as Fig 4-38:
Parameter Meaning
Address The address of the PTZ device
Baud rate Baud rate of the PTZ device. Range form: 110
、300、600、1200、2400、
4800
、9600、19200、34800、57600、115200、230400、460800、921600.
Protocol Communication protocol of the PTZ device. Range from: NULL
、
PELCOP
、PELCOD 、LILIN、MINKING、NEON、STAR、VIDO、DSCP、
VISCA
、SAMSUNG、RM110、HY