LT Security LTD2316SE-SL - Manual (Page 36)

30
Digital Video Recorder User Manual
4.5.3 Video loss
Step1: enter into system configuration alarm configurationvideo loss; refer to Fig 4-26:
Step2: the setup steps of video loss trigger are familiar with
alarm handling; user can refer to Chapter 4.5.1 Sensor
alarm
handling for more details.
Step3: user can setup all channels with same parameters, tick
off “all”, then to do relevant setup.
Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
This tab gives a choice to configure alarm for Disk Full or IP Conflict or the Disconnect event
Fig4-27 other alarm
Step1: enter into system configuration other alarm; refer to Fig
4-27:
Step 2: Use the dropdown menu and select the event for the
alarm.
Step 3: Check the required trigger options
If the selected event is ‘Disk Full’, then use the drop down box
for ‘Disk Shortage Alarm’ to choose a threshold value for
remaining HDD space. If the threshold value is reached, the
system will trigger the Disk Full Alarm.