Aztech Systems DSL9100R - Manual (Page 12)

12
User Manual User Manual User Manual User Manual User Manual
2.2 Overview for DSL9100R
2.2.1 Front View
¬
Power LED
Lights up when Power switch (at the rear) is pressed ON.
­
10/100 BASE TX SWITCH (1 to 4)
LINK/ACT LED - Lights up when the Ethernet link is established. Blinks when
Ethernet is transmitting/receiving data.
COLLISION - Lights up when packets collision occurs.
100MBPS - Lights up if the connection is 100 Mbps. Otherwise, it means the
connection is 10 Mbps.
®
ADSL
LINK - Lights up when the ADSL Line is established.
TX (Transmit) - Lights up when ADSL is transmitting data.
RX (Receive) - Lights up when ADSL is receiving data.
¬ ­ ®