Aztech Systems DSL9100R - Manual (Page 9)

9
User Manual User Manual User Manual User Manual User Manual
For more than 4 PCs connections
Expand using Ethernet Hub or Switch
- To connect to the MDI port of your Ethernet Hub/Switch, please use Straight
CAT-5 UTP Ethernet cable.
- To connect to the MDIX port of your Ethernet Hub/Switch, please use Cross
CAT-5 UTP Ethernet cable.
1.4 Features
• Full Rate and G.lite transmission supported
• RFC1483 Ethernet and IP Encapsulation over ATM, RFC1577 Classical IP over ATM,
RFC2364 PPP over ATM, RFC 2516 PPP over Ethernet protocol with additional
software stack support
• Static IP, RIP1 and RIP2 routing support
• SNMP support for management functionality
• Remote management through Telnet console access
• Network Address Translation (NAT) / Port Address Translation (PAT)
• DHCP Server
• TFTP Software update
• PAP/CHAP Password Authentication
• Offers 4 dual-speed 10 Base-T / 100 Base-TX switch ports for Local Area Network
access
• Fully support IEEE 802.3 Ethernet and Fast Ethernet
• Fully support IEEE 802.3u Auto-Negotiation which provides automatic selection of
transmission modes, half and full duplex as well as transmission speeds, 10 Mbps
or 100 Mbps
• Stack-ability design to allow for addition of additional switch and Wireless LAN
modules
• Multi-stand design allows for convenient and flexible placing