Aztech Systems DSL9100R - Manual (Page 17)

17
Setting Up the
Ethernet Card
You need to configure the Ethernet Card on your PC in order to run
DSL Router Commander 5 from your PC.
Chapter
4
1. The screen shots and screens information illustrated in this manual serve
only as a guide. The exact information you see on your system may
vary, depending on your system configurations. For any dissimilarities,
follow closely to the instructions as prompted on your PC screen.
2. All IP addresses and Subnet Mask indicated in this manual serve only
as examples for your better understanding. You are required to replace
these values with those given by your ADSL Service Provider/System
Administrator.
5 DSL Router Commander is a user-friendly software that allows you to set, view and modify
your network configurations. For details, you may refer to the DSL Router Commander
Software Manual.