Aztech Systems DSL9100R User Manual

Page 25

Advertising
background image

25

User Manual

User Manual

User Manual

User Manual

User Manual

The following error message was prompted when I tried to log in to DSL Router

Commander.

This happens when the link between your Ethernet card and DSL9100R has not

been established. Please refer to

section 4.2 - Verifying the Connection Between

the Ethernet Card and DSL9100R

.

I get 'Request timed out' response when I ping to DSL9100R.

Check that you have entered the correct IP Address for your Ethernet Card as

specified by your System Administrator (see

Chapter 4 - Setting Up the Ethernet

Card

). It should be in the same subnet as DSL9100R.

Restart your system for the IP Address to take effect and try to ping again.

Advertising