RIKON Power Tools 30-251 - Manual (Page 5)

Model 30-251 34” Floor Radial Drill Press
is shipped complete in one box.
1. Unpacking and Checking Contents
a. Separate all “loose parts” from packaging
materials and check each item with “Table of
Loose Parts” to make sure all items are
accounted for, before discarding any packaging
material.
b. With the help of another person, carefully lift the
Drill Press head out of the box.
c. Remove protective oil that is applied to the table
and column before assembly. Use any ordinary
house hold type grease or spot remover.
d. Apply a coat of paste wax to the table and
column to prevent rust. Wipe all parts thoroughly
with a clean dry cloth.
TABLE OF LOOSE PARTS
Item Part Name Qty
A Drill Press Head 1
B Arm 1
C Table Support 1
D Table 1
E Column Assembly 1
F Base 1
G Loose Beg 2
H Chuck 1
I Owner’s manual 1
Contents of Package
5
Tools required for assembly
1. Allen wrenches (provided).
2. Rubber mallet or block of wood and hammer.
3. Adjustable wrench or open end wrench.
4. Household grease remover.
5. Hex. Wrench (provided)
A
B
C
D E
F
G
G
H I