Seca 675 - Manual (Page 63)

Before you really get started… • 63
English
5.4 Establishing power supply
The scales are powered by a power pack. Depending
on model, the scope of supply will include either a
power pack with plug adapters or a power pack with a
fixed Euro connector.
Connecting the power
pack
WARNING!
Using the wrong power packs may cause bodily
injury or damage to the device
Conventional power packs may deliver a higher
voltage than is indicated on them. The scale
may overheat, catch fire, melt or short-circuit.
– Use only original seca plug-in power packs
with a 9 V or controlled 12 V output voltage.
1. If required, insert the power supply connector nec-
essary for your power supply into the power pack.
2. Insert the connector of the power pack into the
connecting socket of the scale.
3. Plug the power pack into a power supply socket.