Seca 515 User Manual
Page 38
38 •
The patient details are displayed.
5. Make sure that you have selected the correct patient.
NOTE:
• If you wish to perform a new patient search, press the
new patient
button.
• If you wish to return to the results list, press the
cancel
button. If
the results list has only one entry, the search screen appears.
6. Press the
confirm
button.
The current measurement is assigned to the selected patient.
The name of the patient appears in the header of the touchscreen
display.
The
analysis
tab is active again
ATTENTION!
Data loss
The measurement has now been assigned to a patient, but has not
yet been saved. If there is no new entry for approx. 5 minutes, the
device switches to standby. The current measurement is
discarded. The complete measurement procedure must be
repeated.
− Save the measurement as described in section „Closing the