Seed Hawk 30 SERIES 2015 - Manual (Page 16)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 11
2.9.1 Location of Warning Decals
2.9 Safety Signs
SH 400
SH T2 SH 200
1. Read Operator
’s Manual before using machine.
2. Stop tractor engine, lower machine to the ground, place all controls in neutral, set park brake, remove ignition key and wait for all moving parts to stop before servicing, adjusting, repairing, unplugging or fitting. 3. Install and secure all guards before starting. 4. Keep hands, feet hair and clothing away from moving parts. 5. Do not allow riders. 6. Keep all hydraulic lines, fittings and couplers tight and free of leaks before using. 7. Clean reflectors, SMV and lights before transporting. 8. Install safety locks before transporting or working beneath components. 9.
Add extra lights and use pilot vehicle when transporting during times of
limited visibilty
.
10. Use hazard flashers in tractor when transporting. 11. Install safety chain when attaching to tractor
.
12. Keep away from overhead electrical lines. Electrocution can occur without direct contact. 13. Review safety instructions with all operators annually
.
4
SH 700