Seed Hawk 30 SERIES 2015 - Manual (Page 49)

SEED HAWK ® 2015 30 SERIES OPERATOR’S MANUAL – DOMESTIC 44
NOTE: This is the only
instance when the Selector
Knob and the Enter Key
perform separate functions.
4. Volume: Sets the alarm volume
level. Navigate to this selection and
press the
Selector Knob to se-
lect the item. Rotate to increase or
decrease the alarm volume and press
the
Selector Knob or the Enter
Key to set the new alarm volume
setting.
5. Backlight: Sets the display back-
light level. Navigate to this selection
and press the
Selector Knob to
select the item. Rotate to increase or
decrease the backlight and press the
Selector Knob or the Enter Key to
set the new backlight setting.
3. Width: This is the width of the
implement, Navigate to this item and
press the
Enter Key. A drop down
keypad will appear allowing the op-
erator to enter the implement width
in the form XX.X feet or meters
depending on the units selected. Nav-
igate to the individual numbers and
press the
Selector Knob to accept.
When the total number is entered
press the
Enter Key to save the new
width value.
6. Contrast: Sets the display contrast.
N
avigate to this selection and press
the Selector Knob to select the
item. Rotate to increase or decrease
the contrast and press the
Selector
Knob or the Enter Key to set the
new contrast setting.