SHARKOON Rebel9 Aluminum U3 - Manual (Page 11)

11 REBEL9 ALU U3
7. Installation of an optical device
1. Remove the case’s front panel by gently dragging it towards you (fig. 9).
fig. 9
2. Dismantle the 5.25" front bezel from the mounting bay in which you intend to install the
drive by loosening its screws and pushing the bezel to the inside (fig. 10). Remove the quick
fasteners (fig. 11).
fig. 10 fig. 11
(Carefully take out an optionally present metal bezel covering the 3.5" drive bay by using a
gripper.)
3. Slide the optical drive into the case’s drive bay (fig. 12).
fig. 12
