SHARKOON Rebel9 Aluminum U3 - Manual (Page 15)

15 REBEL9 ALU U3
11. Installation of additional fans / optimized airflow
1. Place the fan against the respective bracket from the inside (e.g. in the top panel / fig. 22).
fig. 22
2. Screw the fan to the attachment from the outside (fig. 23).
fig. 23
Note:
The Rebel 9 Aluminum case offers a lot of possibilities to install fans.
While installing fans make sure that (cool) air is taken in on the case’s front side/bottom and
blown out on its back side/top. The PC components with the highest heat development
should be placed directly within the airflow.
