SHARKOON Rebel9 Aluminum U3 - Manual (Page 9)

9 REBEL9 ALU U3
6. Plug the connectors of the case’s front bezel to the respective connectors of the mainboard
(also refer to your mainboard’s manual for further information).
5. Installation of a PSU
1. Set up the case in front of you and put the PSU from the inside against the PSU bracket on
the case’s back side (fig. 5).
fig. 5
2. Screw the PSU to the case from the outside (fig. 6).
(Screws for PSU mounting)
fig. 6
