Spectra Precision ProFlex 800 CORS - Manual (Page 19)

15
Note that once it is properly secured, the trapdoor pushes
the battery against the bottom of the compartment to
ensure electrical connection of the battery to the ProFlex
800.
Display Screens If you press the Scroll button several times, you will see the
following displays successively.
Power-On Screen
When you power on the receiver, the Ashtech logo appears on
the screen. It is displayed until the receiver has completed its
auto-test (this takes about 30 seconds).
Then the General Status screen is displayed.
General Status Screen
An example of General Status screen is shown below.
This screen displays the following information:
• : Satellite icon [1] (always displayed).
• Number of satellites tracked [2].
• BASE [3]: A label indicating that the receiver is used as a
base.
• Number of satellites used [4]: Number of satellites
processed by the reference station and for which
corrections are made available to users. These satellites
[1]
[7] [8] [9] [10] [11]
[2] [3] [4]
[6]
[5]