Spectra Precision ProFlex 800 CORS - Manual (Page 45)

41
To change the units, select your preference from the Units
pane on the left-hand side of the Web Server window. This
pane is visible in both the
Status and Configuration tabs.
Distance Units
• Meters
• US Survey Feet
• International Feet
Angle Units
The possible formats for angles, including latitudes and
longitudes, are the following:
• Degrees (Deg.)
• Degrees, minutes (Deg. Min.)
• Degrees, minutes, seconds (Deg. Min. Sec.)
The format of latitude and longitude depends on the chosen
angle unit. The corresponding formats are described in the
table below.
FTP Push
Indicates whether the recorded raw data files are uploaded to an external FTP
server (“On”) or not (“Off”).
Column #8
Date
Current date (YYYY-MM-DD)
Time Current local or UTC time (hh:mm:ss) according to the setting below.
Alarm report
Blank area if no alarm has been detected.
“Alarms” displayed if an alarm has been detected in the receiver, followed by the
number of raised alarms, between brackets (x).
A click on “Alarms” will open the Status-Alarms web page to list this or these
alarms.
Angle Unit
Used
Latitude Format Longitude Format
Deg.
DD.DDDDDDDD° N or
DD.DDDDDDDD° S DDD.DDDDDDDD° E or
DDD.DDDDDDDD° W
Deg. Min.
DD°MM.MMMMMM’ N or
DD°MM.MMMMMM’ S DDD°MM.MMMMMM’ E or
DDD°MM.MMMMMM’ W