Spectra Precision ProFlex 800 CORS - Manual (Page 55)

51
– In the Memory Location field, choose the memory the
FTP server will give access to.
– In the FTP Path field, specify the path to the
subdirectory (in the selected memory) the FTP server
will have access to (syntax: /subdirectory/.../
subdirectory/). The first and last slashes are optional.
– Administrator Username and Password fields: Username
and password for the administrator of the embedded
FTP server (default: “admin”, “changeme”). Not to be
confused with the administrator of the ProFlex Web
Server. It is your responsibility to define distinct or
similar connection profiles for these two
administrators.
• Click on the Configure button to save all your settings.
• Click on Back to return to the Embedded FTP Server web
page.
• In the Users pane, enter as many user profiles for the
Embedded FTP server as necessary.
For each user, enter a Username and a Password, then click
on Add/Modify.
To modify the password of a user profile, click on the
corresponding username in the table on the right. This
updates the
Userrname and Password fields with the
current settings of this profile. Edit the password and click
on
Add/Modify.
To delete a user profile, click on the corresponding
username in the table on the right and click on
Delete.
Setting the
External Sensors
Before starting, you should know which sensors are used, and
which receiver ports they are connected to.
If port B or F is used, you should first go to Connections - Serial
Ports and enable the Power ON box, followed by a click on the
Configure button.
Setting a tiltmeter or a meteorological unit refers to the same
procedure. For this reason, only the setting of a
meteorological unit is described below.
• Click on Connections and then on Meteorological Unit.
• Identify the pane describing the serial port to which the
sensor is connected (Serial Port A, Serial Port B or Serial
Port F). Then set the parameters located inside this pane
as follows:
– Enable the Process Meteorological Unit option so that the
receiver can start querying the sensor right after
clicking on
Configure.