None key, Configuring a none key, Line keys and softkeys – Aastra Telecom 6757I CT User Manual
Page 157
Model 6757i CT IP Phone User Guide
147
Line Keys and Softkeys
None Key
You can set a softkey, or expansion module key to force a blank entry on the IP phone display for a
specific key. You do this by setting the key to "none". The keys are added in order (from key1 to
key20) after any hard-coded keys have been added. If a particular key is not defined, it is ignored.
For more information about key behavior, see
.
Configuring a None Key
Use the following procedure to configure a None key on the 6757i CT IP Phone. The procedure
shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from “Key 1” through “Key 10” on the Top keys.
or
Select from "Key 1" through "Key 20" on the Bottom keys.
3. In the "Type" field, select None.
Aastra Web UI