Using intercom, Using the icom key, Making calls – Aastra Telecom 6757I CT User Manual

Page 165

Advertising
background image

Model 6757i CT IP Phone User Guide

155

Making Calls

Using Intercom

On the 6757i CT, you can use the Icom key to automatically connect with a remote extension. By
default, the Intercom key is configured as Key 4 on the top set of softkeys.

Using the Icom Key

1. Press the Icom key.

2. Enter the extension number of the person you wish to intercom or the BLF key for that

extension.

3. After a beep tone, your phone automatically connects with the remote extension and you can

speak through its speaker.

4. To cancel intercom, press

or the Cancel key.

5. When you are finished speaking, hang up the phone by placing the handset back on-hook or by

pressing

or the line/call appearance button for the active call. When you hang up,

the remote phone also hangs up.

You can set specific incoming Intercom call features on the 6757i CT IP phone using the Aastra
Web UI. The following table describes these features.

IP Phone UI

Incoming Intercom Features
in Aastra Web UI

Description

Microphone Mute

Allows you to enable or disable the microphone on the IP phone for
Intercom calls made by the originating caller.

Auto Answer

Allows you to enable or disable the IP phone to automatically
answer an Intercom call. If auto-answer is enabled on the IP phone,
the phone plays a tone (if "Play Warning Tone" is enabled) to alert
the user before answering the intercom call. If auto-answer is
disabled, the phone rejects the incoming intercom call and sends a
busy signal to the caller.

Intercom

Key

Advertising