Aastra Telecom 6757I CT - Manual (Page 249)

Model 6757i CT IP Phone User Guide 239
Pairing and Unpairing Cordless Handset to Base
Unpairing the Handset from the Base Unit Using the Handset UI
1. On the Handset, press  (Menu).
2. Select Hset pairing.
Press the Remove softkey.
Upon success or failure of unpairing, one of the following screens displays on the Handset.
Successful Removal Attempt
Handset UI
Notes:
1. Ensure the Handset being unpaired is within close proximity to the Base Unit. It
is recommended that the Handset be within 3 feet from the Base Unit during
unpairing. If the Handset is out of range, and you perform unpairing from just the
Handset, the Handset is unpaired, but the Base Unit remains paired. If
communication between the Base Unit and the Handset is lost, you must perform
unpairing on the Base Unit as well.
2. Unpairing of the Handset returns it to factory default state. All data, including the
functions in the Feature key, are removed.
Note: If the Handset is not paired, the softkey is labeled as Pair instead of Remove.
7 - Hset pairing
= Scroll
Remove
Attempting to
remove...
Cancel
Removal
successful