Spectra Precision Survey Pro v5.3 - Manual (Page 50)

42
Sideshot
• Be sure the instrument is pointed at the target placed over the point.
• Tap Sideshot. Survey Pro returns the results of the measurement in the
lower portion of the screen ([1]). The point name is automatically
incremented for the next measurement. Tapping on the
Result tab will
provide more information on the measurement made ([2]).
Point: Point name
N: Point coordinate Y
E: Point coordinate X
Elev.: Point coordinate Z
Description: Point description
Angle Right: Azimuth angle measured from the occupy point to the foresight
point (measured in a horizontal plane)
Zenith: Zenith angle measured from the occupy point to the foresight point
(Zenith is measured in the vertical plane, relative to gravity, where 0 is
pointing straight up, parallel to gravity, and 90 is pointing straight ahead,
orthogonal to gravity.)
Slope Dist: Slope distance measured from the occupy point to the target
Horz Dist: Horizontal distance calculated from the occupy point to the target
Vert Dist: Vertical distance measured from the occupy point to the target.
• Repeat the above two steps until all your points have been measured.
[1] [2]