Spectra Precision Survey Pro v5.3 - Manual (Page 87)

79
Remember the rover receiver is always in dynamic mode ( >ROVING button
displayed) as you navigate to the design point:
NOTE: You can use the Topo SS button any time along the way to store any point of
interest. Survey Pro will ask you to name and describe that point before storing it.
When you get closer to the design point, the graphic will change to assist
you in more precisely locating the design point. The point to stake becomes
the fixed center of the display and the rod becomes the object that is
moving. This aids in precisely positioning the rod over the point. A red arrow
indicates the direction in which to go.
1. Distance to go is between 3.0 and 0.3 m (10 and 1 ft): Dark-green spots
appear around the graphic.
2. Distance to go is less than 0.3 m (1 ft): The spots around the graphic
turn light green.
3. Your current position is within the acceptance criteria defined on the
Stakeout tab: The rover and the design point are practically
superimposed at the center of the graphic.
Symbol Meaning
Design point location.
Your current location.
Reference point or azimuth.
Scale used on the graphic. Represents the circle radius.
Go N/S: xxx
Go E/W: xxx
FILL/CUT: xxx
Horizontal and vertical components of the distance still to go.