Spectra Precision Survey Pro v5.3 - Manual (Page 61)

53
• Automatically accept when criteria is met checked: The use of this parameter
makes sense when it is combined with
Average for checked. Survey Pro will
automatically store the point at the end of the averaging time, unless some
other acceptance criteria are not met. In that case, at the end of the count
down, the
Accept button will be restored on the screen and when you tap
on it, you will see screen type [3].
When screen type [3] is displayed, you can either ignore the warning message
(tap
Accept Anyway), or ask for more data collection on the point (tap Keep
Measuring) until you are satisfied with the collected data (you will then tap
Accept to end the point collection).
[1]
[3]
[2]