Spectra Precision Survey Pro v5.3 - Manual (Page 71)

63
• For a “temporary” reference point (<base point name> (survey)), you can
use the context menu to save the reference point to the reference station
database.
Ending a Survey
Go to the Home screen and tap End Survey. Confirm the end of survey by
tapping End.
A survey in progress implies that either a base or a rover or both are running.
You will need to end the currently running survey if you wish to reset the base
or rover.
Opening an existing job or creating a new one while a survey is in progress will
automatically end the current survey.
When an RTK rover or/and an RTK base is used in a survey, then ending this
survey will cause the rover to stop listening for corrections, and/or the base to
stop sending out corrections. (ProMark will however continue to operate as
rovers.)