Avaya OFFICE 5410 - Manual (Page 21)

Selecting Personalized Options Changing the 5410 Options - Page 21
IP Office 5410 User’s Guide Changing the 5410 Options - Page 21
40DHB0002UKEY – Issue 1 (7th February 2005) Selecting Personalized Options
Call Log Setup
Through the Option menu you can specify which types of calls should be included in
the 5410's call log. See Setting Which Calls are Logged on page 18.
Using Self Test
Self test can be used to display information about the phone and to check operation of
the lamps and display. The information may be required by a telephone system
maintainer.
1. Press Option. If
Option is not shown, press any Soft Key.
2. Press Self Test. A screen of information appears.
Caution: In the top row, the centre of the display should show REL:2.00 or
higher. If not the telephone’s software needs to be upgraded. Consult
your system Administrator.
3. Press and hold the Test key. The screen lines should all go black and all the
phone lamps should come on. If they do not consult your system Administrator.
4. Release the Test key and do one of the following:
• To return to the options menu, press Done.
• To return to the call handling screen, press Exit.
Default Phone/Erase All Settings
The Erase option allows you to reset all personalized settings entered through the
5410's Option menus (except contrast level). It also deletes all entries in the phones
Call Log and Speed Dial lists.
1. Press Option. If
Option is not shown, press any Soft Key.
2. Press the until the display shows:
• Speed Dial List, Call Log, User Labels, Options, Language and All.
3. If you do not want to erase, do one of the following:
• To return to the options menu without erasing, press Cancel.
• To return to the call handling screen without erasing, press Exit.
4. To continue with erasing, select from Speed Dial List, Call Log, User Labels,
Options, Language and All and press Erase.
You will be asked to confirm the action.
• If you want to erase all settings, press
Erase again.
• To return to the options menu without erasing, press Cancel.
• To return to the call handling screen without erasing, press Exit.