Avaya OFFICE 5410 - Manual (Page 45)

Function Key Programming Function Keys - Page 45
IP Office 5410 User’s Guide Function Keys - Page 45
40DHB0002UKEY – Issue 1 (7th February 2005) Function Key Programming
[User | Digital Telephony | Advanced | Dial | Dial Paging]
See also:
• GrpPg - Group Paging (!)on page 40.
Park - Park (#)
Park calls to and retrieve calls from a specific park slot.
This function requires entry of a park slot number when programmed. That number and
Park then appears next to the
key. This function can be programmed through the
phone by the user using an Admin 1 key.
The user can use the key to park calls into that park slot and unpark calls from that
slot. Parked calls can also be retrieved with the Ride function (see page 52).
When a call is parked in that park slot by the user, a symbol appears next to the
key and parked by another user, then Park is underlined.
[User | Digital Telephony | Park]
See also:
• CPark - Call Park (!) on page 33.
• Park - Call Park to Other Extension (!) on page 47.
• Ride - Ride Call on page 52.
Park - Call Park to Other Extension (!)
Allows a call to be parked against another extension. Depending on the other
extension's type, its parked call indication is triggered. Parked calls are retrieved with
the Ride function (see page 52).
This function can be programmed with or without a target extension number. This
function can be programmed through the phone by the user using an
Admin key.
If programmed with a number, the Park key displays that number. After answering
a call, pressing Park parks the call against that extension.
If programmed without a number, after pressing Park the target for the parked call
must be entered.
The parked call is assigned a number based on the parking extensions number. For
example, extension 290's first parked call is numbered 2900, it’s next 2901 if 2900 is
still parked and so on. If not retrieved elsewhere, a parked call will recall to the parking
extension after a set time.
[User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
• CPark - Call Park (!) on page 33.
• Park - Call Park to Other Extension (!) on page 47.
• Ride - Ride Call on page 52.
PCall - Priority Call
Call a specified target extension even if that extension is set to 'Do not Disturb'.
This function can be programmed with or without an extension number being specified.
If programmed with an extension number then the target extension is shown next to
PCall. If programmed without an extension number then the user has to enter the
extension number when
PCall is pressed