Here- - follow me here cancel, Here+ - follow me here, Hfans - internal auto-answer (!) – Avaya OFFICE 5410 User Manual

Page 40: Hgena - hunt group enable, Fwnof - forward on no answer off, Fwuon - forward unconditional on, Fwuof - forward unconditional off, Grppg - group paging (!), Hdset - headset toggle (!), See also

Advertising

Page 40 - Function Key Programming

Function Keys

Page 40 - Function Keys

IP Office 5410 User’s Guide

Function Key Programming

40DHB0002UKEY – Issue 1 (7th February 2005)

Here- - Follow Me Here Cancel

If another extension has follow me set to this extension, switches off the follow me
action.
This function requires the original target extension to be entered when programmed.
The extension number is then shown next to Here-. This function cannot be
programmed through the phone by the user.
Pressing

Here- cancels the use of follow me at the target extension.

[User | Digital Telephony | Advanced | Follow Me | Follow Me Here Cancel]

Here+ - Follow Me Here

Forwards calls to the target extension to this extension.
This function requires the original target extension to be entered when programmed.
The extension number is then shown next to Here+. This function cannot be
programmed through the phone by the user.
Pressing

Here+ sets the target extension's Follow Me To number to that this

extension. Calls to the target extension are then forwarded to this extension.

[User | Digital Telephony | Advanced | Follow Me | Follow Me Here]

HfAns - Internal Auto-Answer (!)

Answers internal calls after a single ring.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an

Admin key.

The

HfAns key toggles internal auto-answer on/off. When on, HfAns is shown with

a symbol.

[User | Digital Telephony | Emulation | Internal Auto Answer]

See also:
• RngOf - Ringer Off (!) on page 52.
• CWOn - Call Waiting On on page 34.

HGEna - Hunt Group Enable

Sets the extension's membership of a group or groups as enabled. This function does
not take the Hunt Group In/Out of Service.
This function can be programmed with or without a target group number. This function
cannot be programmed through the phone by the user.
If programmed without a group number, pressing

HGEna toggles all the extension's

group memberships to either enabled or disabled. A is shown next to

HGEna

when the group memberships are enabled.
If programmed with a group number, that number is shown next to

HGEna.

Pressing

HGEna will enable the extension's membership of that group. In this

mode the key does not toggle.
When enabled, G is shown on the display and the extension will receive group calls.

[User | Digital Telephony | Advanced | Hunt Group | Hunt Group Enable]