1 text input – Aposonic A-S1602R25 User Manual
Page 21
- 21 -
4.1 Text Input
There are certain circumstances that the system requires the user to enter text, such as
system login, camera title setup, and so on. Please follow the steps below to enter
text:
(1) Press
ENTER
to edit the highlighted option. The flashing cursor will be shown
to indicate the editing point.
(2) Press ◄►
to move the cursor to the left/right.
(3) Press
code
in text editing mode to change text case. (If this entry can accept
number only, pressing
code
will have no effects.) Indicators on the screen show
the current setting:
123
= Number only
abc
= No capital letters
ABC
= All capital letters
CODE
= Internal code for the selected language, such as Chinese, Japanese, etc.
(4) Press a number key (
1-9, 0)
repeatedly until the character you want appears (
1
for
1 or space,
2
for 2, a/A, b/B, or c/C, etc.). If internal
CODE
is selected, a
CODE box will be shown (after the first code is entered) for each new code to be
entered. Please check the internal code table for the selected language. For
2-byte code, e.g. Chinese or Japanese, the code accepted is from 0000 - FFFF.
(5) Press
mark
to bring up a list of punctuation marks and special characters. The
highlighted character in the list shows the selected one. Press ▲▼◄►
to
change the selection.
(6) If you make a mistake, press
BS
to remove the character to the left of the cursor,
or press
DEL
to delete the character at the current cursor position.
(7) In text editing mode, internal code box, and mark list, press
ENTER
to exit and
save changes, press
ESC
to exit without making changes.
Note: If the user clicks on the left button of the mouse on the item, a Keyboard
Simulator will be shown. Click on ‘#’ (or “abc”, ..) to change text case.
Click on the alpha-numeric characters to enter text (or CODE). Click on ‘*’
for
mark
.