Aposonic A-S1602R25 - Manual (Page 38)

- 38 -
Press these buttons to select the items. The display will scroll left/right if the
selected item is not shown on the screen.
Numeric
Press these buttons to select the camera.
COPY ( )
Press this button to copy all the settings - excluding detailed Motion settings,
Video Loss settings, Title/Audio - of the focus camera to all the following
cameras. (EX. focus camera is 1, its settings will be copied to those of cameras
2-8/4.)
ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to Setup Menu display. If
the Save dialog is shown, press
ENTER to exit and save, ESC (Mouse: Right
Click) to exit without saving.
Following is a brief description for each item and its specific operations:
Title – The title (Max. 8 characters) of this camera. Please follow the Text Input
method described in
Section 4.1 to modify this item.
Video Loss Settings.. – used to setup the action settings when video loss is
detected for this camera. Press
ENTER (Mouse: Left click) in Settings.. to
call up Video Loss Setup display for the camera. Please refer to Section 6.2.1
for the details.
Motion Detection – whether the motion detection of this camera is enabled or not.
(Note : this field has no effect for the Smart Search information.) Press
ENTER or +/- to check/uncheck this item. The default setting is “ˇ ˇ ˇ ˇ” - checked.
Motion Settings.. – used to setup the motion settings, used for Motion Detection
or Smart Search , for this camera. Press ENTER (Mouse: Left click) in
Settings.. to call up Motion Setup display for the camera. Please refer to Section
6.2.2 for the details. Please note that if the Motion Detection is disabled, the
default factory motion settings should work fine for Smart Search.
Covert – covert or not. If the camera is covert, the video of this camera can only
be seen if the user has logged in as Administrator. Press
ENTER or +/- (Mouse:
Left click) to check/uncheck this item. The default setting is “– – – –” - unchecked.
Call By Event – whether to switch the monitor to the video of this camera if
certain event occurs for this camera. There are 4 options, including Off, Motion,
Alarm, Both (Motion & Alarm). Press
+/- buttons to select one.
Dwell Time – the dwell time if Call By Event is set to Motion, Alarm, or Both.