Aposonic A-S1602R20B - Manual (Page 14)

- 14 -
2.3 Remote Controller
The remote controller is an optional accessory to ease the user’s operations. You can
do all the operations by the remote controller instead of the buttons on the front panel.
The effective distance is about 10 meters without any obstacle.
Most of the buttons corresponds to one of those buttons on the front panel. Please
refer to the descriptions in
Section 2.1. For the other buttons, the descriptions are as
below:
1. Alpha-numeric Buttons (1-9, 0, *, #)
Press these buttons for camera selection in most of the circumstances.
These buttons can also be used to enter text and number in the way
similar to most of the mobile phones.
‘*’ is also used to reset channel
numbers in split-window display.
2. Alarm Reset Button
Press this button to cancel alarm activation, and return the system to the
condition before the alarm was activated.
3. MUTE/NEXT Button
In PTZ control, press this button for the next miscellaneous control. In
the other screens, press this button to mute the audio.
4. X2/GOTO Button
In PTZ control, press this button to move the camera to the preset position.
In full screen display, press this button for Digital Zoom (X2/X4).
5. (Vol/Zoom) +/- Buttons ( / / )
In PTZ control, press these buttons to zoom in/out the camera.