Aposonic A-S1602R20B - Manual (Page 65)

- 65 -
„ System Time –
„ Synchronization – time synchronized with TSP Server or not. Press
ENTER or +/- to check/uncheck this item. The default setting is “–” -
unchecked.
„ TSP Server – TSP (Time Synchronization Protocol) server name if Time
Synchronization is enabled. The system will try to do time synchronization
with the specified TSP server at the system preset interval. Please follow the
Text Input method described in
Section 4.1 to modify this item.
„ Date – system date. Press +/- buttons to modify each of these items.
„ Time – system time. Press +/- buttons to modify each of these items.
„ Display Format – format used for the system time displayed on the lower-left
corner of the main screen. Press +/- buttons to select the desired format.
„ Language – press +/- buttons to select the language for the system. The
languages supported include: English, Russian, Simplified Chinese,
Spanish, Traditional Chinese, etc.
„
Protection Key – the protection key for the remote access of the system. Please
follow the Text Input method described in Section 4.1 to modify these items.
Note: This protection key will be used for authentication when any remote station
wants to connect with the system from Ethernet interface, either LAN or
internet. So, the same protection key must be entered to install the remote
software if it is to be used to access the system.
6.9 RS-232/422/485 Setup
In Setup Menu display, press ▲▼◄► to change the highlighted option to
RS-232/422/485, and then press ENTER to call up RS-232/422/485 Setup as shown.