Aposonic A-S1602R20B - Manual (Page 99)

- 99 -
Video Loss, and Normal) to search for playback. Click on Search button to start the
search of the recorded video/audio. (If it failed, the result will be shown on the title
of the dialog.) Now, you may use the playback buttons to play the recorded
video/audio. If there not any camera in playback mode, all cameras will be
searched and played.
Click on this icon to call up Search-by-event dialog. The event logs will be shown
on the screen. Please select the DVR device, event type, and source ID to search for
the event logs. Click on Refresh, Up, or Down to update the event logs. Click on
the desired event log to highlight and select it. Click on the OK button to search the
recorded video/audio for the highlighted event log. Now, you may use the playback
buttons to play the recorded video/audio.
Click on this icon to call up search-PC-video dialog. Please select the
file(s) , and
then click on Open. Now, you may use the playback buttons to play the recorded
video/audio in the file(s).
Click on this icon to call up POS-Search dialog. Please select the DVR, camera, key
word, and start/end time, and click on “Search”, then the matched POS data will be
shown. Please select the desired POS data, and click on “Backup” or “Play” to
backup or play the recorded video/audio corresponding to the POS data.
Click on this icon to show/hide full PTZ control panel. The user can click on the
PTZ Panel (but outside of any object in it) (to call up the Context menu) to move it.
Click on this icon to call up Setup dialog. Unlimited number of DVRs can be
added to the device list. Following is a brief description for each item:
„
Device Name – any meaningful name for the (DVR) device.