Aposonic A-S1602R20B - Manual (Page 45)

- 45 -
camera. In Motion Detection Setup, the video area is divided into many small
grids, and the area with
gray grids is the area which will be detected for motion ,
while transparent grids not detected for motion. Besides, there is a (yellow)
Mask window.
Following is a brief description for the operations:
„ Numeric (Mouse: )
Press these buttons to select the camera.
„ ▲▼◄►
Press these buttons to move the Mask window.
„ +/- (Mouse: Left click and drag)
Press these buttons to resize the Mask window.
„ ENTER (Mouse: )
Press this button to set/reset the area under the Mask window.
„ MODE (Mouse: )
Press this button to set/reset the whole video area.
„ SEQ (Mouse: ) / CALL (Mouse: )
Press this button to decrease/increase the sensitivity, 1 – 10, for the motion
detection of this camera.