COSA Xentaur SF6 Purity Pro - Manual (Page 14)

14
3. SETTING MODE (ENTER + POWER)
The SETTING MODE is for “Change the Measuring Gas,” “Adjusting the time,” and “Confirming the
Saved Data.” Enter the SETTING MODE by pressing the POWER key while the ENTER key is also
being pressed.
Once you enter the mode, the display shown right will appear.
Move the cursor (black bar) with the keys and select
the item you wish to set up. Go into the item by [ENTER key].
Items to Set Up and the Contents
SELECT GAS Changing the measuring gas
SET DATE/ TIME Adjusting the clock
VIEW SAVED DATA Confirming saved data
CLEAR SAVED DATA Clearing the saved data
START MEAS. Starting the Measuring Mode
3-1. Changing the Measuring Gas (SELECT GAS)
Choose the measuring gas with the keys and press the ENTER key to submit your choice. On
the first line, the phrase “IS SETTING OK?” will appear. Press the [ENTER] key again if it is correct. If
you wish to change the setting, press the [CANCEL] key.
The types of selectable measuring gas and range vary depending on the type of RK60000. For more
information, refer to the attached measuring gas specification.