Fire-Lite IPDACT Configurator Quick Guide - Manual (Page 10)

5. Installing the IPDACT using a Serial Port
If you have the IPDACT connected to the Local Area Network where the IPDACT is
going to operate and the IPDACT is connected with the PC using a Serial Port for
configuration purposes (Fig. 13), you do not need to use the IPDACT “Delayed auto-
register” feature and you can perform the registration online.
Fig. 13
Follow the next steps in order to carry out the IPDACT installation:
STEP 1
Select “Quick Install” in the “Configuration Mode” group and “Serial Port” in the
“Connection” box from the main screen.
STEP 2
In the “Port” box select the PC serial COM port where the IPDACT is connected. If the
IPDACT password is the factory default password (24680) you can click on the
“Connect” button to connect to the device. In any other case, enter the device
password in the “User Password” box and click on “Connect”.
Fig. 14
Dm378-Iv3 10