Device status – Fire-Lite IPDACT Configurator Quick Guide User Manual
Page 15
7. Device
status
Device status lets you display a summary on the IPDACT status.
The General Information tab shows the following information line by line:
•
Hardware identification (Teldat MIP v2 @ 11.0592 MHz).
•
Serial Number (S/N: 0540/10007).
•
Software identification (v4.1 US Jul 06 2006).
•
Device time and date.
•
Device MAC address and LAN link state.
• Input/Output
state.
• Tamper
state.
•
PSTN line state.
•
P1 jumper state.
The VisorALARM Link Status tab shows the status and IP connectivity history for the
IPDACT and the VisorALARM receiver. For example if the “VisorALARM Link Status”
tab shows the following information it means that:
State: Active (4)
◄ Currently the IPDACT is connected to the receiver.
03/05 01:46:02 Active
◄ Finally, at this time the IPDACT recovered connectivity.
03/05 01:45:59 Fail
◄ At this time the IPDACT lost connection with the receiver.
03/04 23:08:15 Active
◄ This was the first time the IPDACT was connected after reset.
Fig. 21
Dm378-Iv3
15