Fire-Lite IPDACT Configurator Quick Guide User Manual
Page 9
STEP 10
Once the IPDACT has the parameters, you need to register the IPDACT in the
central. The next screen to appear after clicking on ‘Configure’ asks you if you want
to register the IPDACT in the VisorALARM.
Fig. 10
To continue registering, click on the ‘Yes’ button. Subsequently enter the register
password:
Fig. 11
Finally, select the ‘Register’ option. If the register operation has been successful, the
following screen appears.
Fig. 12
Where this is unsuccessful a screen similar to the above appears indicating an error.
•
Error on answer
: Received data incorrect. Try again. If the error persists
contact the technical service.
•
VA unreachable
: There is a problem in the local network. The network cable
may be disconnected or the IP address for the IPDACT or gateway is incorrectly
configured.
•
No answer
: There is a problem in the connection with the VisorALARM. This
possibly is a problem in the client’s connection to Internet, Internet or the
network on the central side.
Dm378-Iv3
9