Trigger condition does not occur, Sampling frequency of the input signal is very low – GW Instek GLA-1000 Series User Manual User Manual
Page 106
Advertising
GLA User Manual
106
Trigger condition does not occur.
Make sure trigger threshold matches signal setting. If the trigger
condition is too complex, simplify the setting to make it easier for
data capturing.
Sampling frequency of the input signal is very lo w.
Try using the external clock so that the acquiring period is
extended. Here is the frequency range for internal and external
clock.
Internal: 100Hz ~ 200MHz
External: 0.001Hz ~ 150MHz
If there is still a problem, please contact your local dealer or GWInstek at
Advertising